Showing posts with label Gripfid. Show all posts
Showing posts with label Gripfid. Show all posts

Saturday, 17 April 2021

Some New Grip Fids.

How Do All,
Whilst busy making cord making machines, I also made up some Gripfids for a customer to go with their machine, which they requested the handle to be left off so that they may possibly carve their own. 
Whilst I was at it I decided to make a new set of Gripfids for myself as I sold all but one of mine to a customer that was desperate to get hold of them. 
There are 1/4", 5/16" ,3/8" and 1/2" diameter Gripfids here.
I also made a small 1/4" double ended Gripfid which I am sure will prove unnecessarily useful! 

I covered one of my smaller Gripfids with a 5 Pass, Type 5 Pineapple Knot, with a varied interweave.
I love these knots, probably my favourite knot to tie and I tie them with no instructions, just straight out of my head and into my hand.

Along side a large covered net float which I found on Walney Island many years ago. 
this is another Pineapple knot with a varied interweave.

Like a star flower

The knot is made up from 5 separate 6 bight x 7 lead Turk's-Head Knots or Casa Knot if you like.
Tied in 1.5mm polypropylene twine.

Thank you for looking.
Take care,
Barry

Tuesday, 26 February 2013

More Gripfids

How Do All ;-)

I just finished covering a set of Gripfids for a customer in Switzerland.



The tools are 6mm, 8mm and 10mm diameter, suitable for up to 4mm, 6mm and 8mm cords respectively, 

 The tools have a solid Maple handle, covered with a beautiful Pineapple knot.
The smallest is a 35p x 30b, 5 Pass, Type 5 Pineapple knot, the next is a 36p x 32b, 4 Pass, Type 4 Pineapple knot, and the largest is a 45p x 40b, 5 Pass, Type 5 Pineapple knot.


A close up of the Pineapple knot handles.

I made some Pojama's (covers) for the Gripfids from odd ends of climbing rope with the core stripped out.
practical or not? who knows ;-)  

For more info about, and pictures of Gripfids see the link below:
And to see some of the items I have made using Gripfids, check out my Ply-Split Braiding page



Please contact me if you have any questions: knotty (dot) bear (at) gmail (dot) com

Please check out my Etsy Shop for more items.

Thank you for looking.
Take care,
Barry ;-)

Tuesday, 20 November 2012

Some Grip Fids for Sale!

How Do All ;-)

I have just added some of my hand made Gripfids to my Etsy Shop

This is a must have tool for Ply-Split Braiding, and is also and ideal tool for all other kinds decorative knot work.

The Gripfid is made from seamless Stainless Steel tube, and has a long slender hollow point, which is formed in such a way that it will grip onto a cord end that is inserted into the tip. which holds the cord whilst pulling the tool back through the work piece.
This tool can also be used in a similar way to a marlinespike or Swedish fid and will make a fantastic addition to any knot tyers tool kit.



I have these tools tools in 6mm, 8mm and 10mm diameter suitable for up to 4mm, 6mm and 8mm cords respectively, some are available in longer or shorter lengths.


 The tools are supplied with either a naked solid Maple handle, or covered with a beautiful Pineapple knot.
Below is a 5 Pass, Type 5 Pineapple knot, with a special variation of the standard interweave. 

 Above and below you can see how the tool is use for Ply-Split Braiding. 
The tip of the Gripfid is easily passed through the ply's of the cords, then the cord is inserted and the tool withdrawn pulling the cord with it. and building a beautiful braid.
This tool can be used in this way for splicing as an alternative to the Swedish fid or for tying multi strand decorative knots.

Please contact me if you have any questions: knotty (dot) bear (at) gmail (dot) com

Please check out my Etsy Shop for more items.

Thank you for looking.
Take care,
Barry ;-)