Showing posts with label Ply-Split. Show all posts
Showing posts with label Ply-Split. Show all posts

Saturday, 17 April 2021

Some New Grip Fids.

How Do All,
Whilst busy making cord making machines, I also made up some Gripfids for a customer to go with their machine, which they requested the handle to be left off so that they may possibly carve their own. 
Whilst I was at it I decided to make a new set of Gripfids for myself as I sold all but one of mine to a customer that was desperate to get hold of them. 
There are 1/4", 5/16" ,3/8" and 1/2" diameter Gripfids here.
I also made a small 1/4" double ended Gripfid which I am sure will prove unnecessarily useful! 

I covered one of my smaller Gripfids with a 5 Pass, Type 5 Pineapple Knot, with a varied interweave.
I love these knots, probably my favourite knot to tie and I tie them with no instructions, just straight out of my head and into my hand.

Along side a large covered net float which I found on Walney Island many years ago. 
this is another Pineapple knot with a varied interweave.

Like a star flower

The knot is made up from 5 separate 6 bight x 7 lead Turk's-Head Knots or Casa Knot if you like.
Tied in 1.5mm polypropylene twine.

Thank you for looking.
Take care,
Barry

Wednesday, 10 July 2013

Dice Bags & Shaker Cups


How Do All ;-)
Complimentary Colours.

Back in 2004 on an ice climbing trip to Ouray Colorado I happened into Ouray Toys, as any grown man would do! and found a game called Pocket Farkel (also known as 10'000 among other names) and marketed by Legendary Games inc. 
This came in a little plastic box printed with the Ouray Toys logo and not only became a great souvenir of a great trip, but would become my most favorite game ever and has accompanied me on many climbing and non climbing trips over the years.

I was trying to think of a unique and personal birthday gift for my girlfriend, and as it just so happened she seemed to like Farkel too, so I decided to make her a Ply-Split Braided dice shaker cup and a fully reversible dice bag, along with a set of Chessex Vortex Dice in a nice swirly Teal colour to match the bag, also a set of instructions and some tiny 7mm dice, just for fun.

This Dice Shaker cup is based upon one that I made whilst on holiday in Kettwig Germany last year. This one is made from my own hand made, 4 strand paper cords, made with my cord making machines. the technique used to braid the cup is Ply-Split Braiding, and is Single Course Oblique Twining, SCOT for short.
the pattern is arranged to resemble converging train tracks. also Pictured with the Teal, Chessex Vortex dice.

The bottom of the dice cup. 

The dice bag, reversed.

The dice bag, right side out.

Hidden Treasures! 

This is the afore mentioned dice shaker cup which I made whilst on holiday in Kettwig, made from left over scraps of my hand made paper cords from another project. Ply-Split Braided in SCOT. pictured with multi-coloured dice.

The bottom of the dice cup.

The Prototype dice bag I made first to get the dimensions right, this one came out a little small but will do for me ;-) made from recycled fabric from old combat pants.

A Bag O' Joy!

Take care,
Barry ;-)

Tuesday, 11 September 2012

Ply-Split Braided Linen Belt #2.

Ply-Split Braided Linen Belt #2.

(Note: the colours of this belt are Cobalt Blue and Citrus Green, but due to the light the green colour looks washed out in the photos! however; the last photo here taken during the making shows the correct colours) 

Made with my own hand made Linen cords, total length 1100mm including buckle, width 42mm.
The buckle is a stainless steel roller buckle.

The braid is a 24 strand, 4 section SCOT (single course oblique twining) braid, a 6 strand, 2 section SCOT braid keeper loop, and the end of the belt is finished with a 2 section SCOT braid.

A perfec fit! also shown with one of my conquistadors braid belt loop watch straps, I hate wearing a watch on my wrist.

Close up showing the buckle detail, the SCOT (single course oblique twining)  keeper loop, which is spliced in to the belt itself, and the tip of the belt, of which the ends are all spliced back into the belt braid.


The belt can be pierced at any point along its length by pushing the prong through the braid. When you decide to change the length the old hole will close up with a simple wiggle of the braid.

Showing the very neat edge of the braid created by the Ply-Splitting process.

(This picture shows the correct colours of the belt)
Showing the Braiding process in progress, using one of my hand made Grip Fids, several strands are first split with the tool and then a single cord pulled back through. This process is repeated well over 1000 times in the making of this belt.

You can see more of my Ply Split work here:
Thanks for looking.
Take care,
Barry ;-)

Monday, 27 August 2012

Ply-Split Braided Cotton & Flax Vessel.

A Ply-Split Braided Cotton & Flax Vessel.

Created using my own hand laid Cotton and Flax cords.
The body of the vessel is braided in a SCOT (single course oblique twining) design in Cotton.
The rim is made using a Ply-Split Darned section using my own hand made Flax cord.
The ends of the cords are seized and then finished in a very short fringe 
Total height: 205mm.
Body Diameter: 75mm.
Internal Diameter: 54mm
 Overall Rim Diameter: 150mm.







Friday, 20 July 2012

More Ply- Split Braiding.

Ply-Split Braided Linen Belt.

Made with my own hand made Linen cords, total length1075mm including buckle, width 42mm.
The buckle is a stainless steel roller buckle.

The braid is a 24 strand, 4 section SCOT (single course oblique twining) braid, a 5 strand POT (plain oblique twining) keeper loop, and the end of the belt is finished with a 2 section SCOT braid.

A perfect fit! also shown with one of my conquistadors braid belt loop watch straps, I hate wearing a watch on my wrist.

Close up showing the buckle detail, the POT (plain oblique twining) keeper loop which is spliced in to the belt itself, and the tip of the belt, of which the ends are all spliced back into the belt braid.

The belt can be pierced at any point along its length by pushing the prong through the braid. When you decide to change the length the old hole will close up with a simple wiggle of the braid.

Showing the very neat edge of the braid created by the Ply-Splitting process.


Ply-Split Braided bag strap.

Made with my own hand made Axminster wool cords, total length 1480mm, width 62mm.
The braid is a 24 strand, 4 section SCOT (single course oblique twining) braid
 The ends are spliced back into the braid and the starting rod was replaced by a cable laid cord with the ends finished in Manrope knots.
The bag that this strap is intended for is still on the drawing board! ;-?


Showing the very neat edge of the braid created by the Ply-Splitting process.

You can see more of my Ply Split work here:
Thanks for looking.
Take care,
Barry ;-)