Knotty Bear getting all Knotty again!

How Do All ;-)

So, it's been a while since I did anything new on the knotting front, and when I get the urge to tie something I don't hold back!
I decided to tie a long pineapple knot with a varied pattern, just to make sure I was still on top of my game.

Below is a picture the finished Pineapple Knot being examined by Buddha.
I think he probably approves.

This is a 90 part x 48 bight, 6 Pass, Type 6 Pineapple Knot, with a varied interweave, tied over a beach combed fishing net float which I found on the beach near my old home town of Barrow-In-Furness

There are loops at each end formed from one long length of 10 strand trapezoidal braid U6, O2, spliced and stitched into a continuous strop.

There are two 12 part x 12 bight, 2 Pass, Type 2 Pineapple Knots sitting either side of the main knot, with a foundation of 8 bight, Single Strand Matthew Walker Knots.

All tied in 1.5mm line.

The braiding of the 10 strand trapezoidal braid in my braiding clamp.

The total length is 190 mm (7.5") x 45 mm (1.75") This would make one very large and very buoyant key fob for your boat keys, or a very nice light or fan pull handle, or the grip on a dirty bag, etc. etc..

The main Pineapple Knot is actually made up from 6 separate 15 part x 8 bight Turk's-Head knots, these are all interwoven into one single knotted covering. the fact this has a varied pattern makes it that much more special.

If you are a Knot Tyer and wish to try your hand at this interweave, or at least one very similar which is easily altered to make this interweave, bearing in mind you should be at least able to tie a standard multi pass Pineapple Knot, then please check out my help tutorial here: Pineapple Knot interweave tutorial. please note, this link will open a new window!

A close up of the finished Pineapple Knot, being examined by Buddha and in my hand for an idea of size

Thank you for looking,
Take care,
Barry ;-)

My Etsy Store, Update #2! More New Items!

How Do All ;-)

I have just added some more new items to my Etsy Store Jewellery Section.
Rather than list every single item here in duplicate here are a few pictures of the items, and you can see the full details in my store. My Etsy Store

These are my beautiful Dragonfly Brooches!

Thank you for looking!
Take care,
Barry ;-)

A Pineapple Knot Variation. Links Fixed!

How Do All ;-)

Just a quickie!

I was unaware that the links to the pdf  file for the below Help Tutorial were broken and the file was no longer where it was stored, 

I have now uploaded the pdf to my Google Drive and the links on my Tutorials and Help page all work again

Sorry to anyone that tried the links and found nothing of any help! And thank you to Graham for pointing this out to me :-)

I copied the tutorial information here to save you having to open yet another window :-D

Thank you for looking.

Take care,

Barry ;-)

A Pineapple Knot Variation.

Click above for the pdf file which includes the Under / Over sequence and some help pictures to enable you to add the white interweave variation to a *27 part x 24 bight 3 pass, Type 3 Pineapple knot.

Please note: the finished knot will be a 42 part x 48 bight, 6 pass, Type 3 Pineapple knot pictured above.
*You will need to be able to tie the mentioned 3 pass, Type 3 Pineapple knot unaided before you start.

Below: is a 7 pass, Type 4 knot made using the same interweave pattern.

Below: is a 4 pass, Type 3 knot made using a variation of the same interweave pattern.

Dice Bags & Shaker Cups

How Do All ;-)

Complimentary Colours.

Back in 2004 on an ice climbing trip to Ouray Colorado I happened into Ouray Toys, as any grown man would do! and found a game called Pocket Farkel (also known as 10'000 among other names) and marketed by Legendary Games inc. 

This came in a little plastic box printed with the Ouray Toys logo and not only became a great souvenir of a great trip, but would become my most favorite game ever and has accompanied me on many climbing and non climbing trips over the years.

I was trying to think of a unique and personal birthday gift for my girlfriend, and as it just so happened she seemed to like Farkel too, so I decided to make her a Ply-Split Braided dice shaker cup and a fully reversible dice bag, along with a set of Chessex Vortex Dice in a nice swirly Teal colour to match the bag, also a set of instructions and some tiny 7mm dice, just for fun.

This Dice Shaker cup is based upon one that I made whilst on holiday in Kettwig Germany last year. This one is made from my own hand made, 4 strand paper cords, made with my cord making machines. the technique used to braid the cup is Ply-Split Braiding, and is Single Course Oblique Twining, SCOT for short.

the pattern is arranged to resemble converging train tracks. also Pictured with the Teal, Chessex Vortex dice.

The bottom of the dice cup. 

The dice bag, reversed.

The dice bag, right side out.

Hidden Treasures! 

This is the afore mentioned dice shaker cup which I made whilst on holiday in Kettwig, made from left over scraps of my hand made paper cords from another project. Ply-Split Braided in SCOT. pictured with multi-coloured dice.

The bottom of the dice cup.

The Prototype dice bag I made first to get the dimensions right, this one came out a little small but will do for me ;-) made from recycled fabric from old combat pants.

A Bag O' Joy!

Take care,
Barry ;-)

Cast Net, For Sale!

How Do All ;-)

I have just added this Beautiful hand braided Cast Net to my Etsy Shop

12 feet diameter hand braided Cast Net.

This Beautiful Cast Net was a labor of love and over a year in the making 

The main body of the net is hand braided in 0.33mm, 19lb monofilament Nylon line.

The centre and bottom edge of the net are hand braided in 0.44mm, 32lb monofilament Nylon line.

There are over 29,000 knots in the finished net.

The actual spread diameter of the net is just over 3.65m (12ft)

The lead line is 6mm Polypropylene line, has 118 1oz lead weights on it, is 13m (43ft) in length and hand braided to the perimeter of the net.

The 24 brail lines are made from 0.70mm, 60lb monofilament Nylon line.

 The horn in the centre of the net is turned from Nylatron and has Stainless Steel brail separators mounted inside, the horn is attached to the net with #18 Bonded Nylon twine. 

 The hand line is 9mm hollow braided Polypropylene about 30ft long with a wrist loop spliced in one end, the other end is spliced to a swivel connected to the brail lines.

Well over a hundred man hours (too many more to even count) went into the making of the practical work of art, and the price I am putting on this net is in no way close to the actual value of such work of art, in fact it is a mile off! but I am at a point where I would rather see this item enjoyed, displayed and/or used by someone that can truly appreciate its real value.

I will also include any information on use, care and repair that I have.

The net is supplied in a Plastic snap lid bucket for ease of transport and storage.

Price: £500.00

P+P Via Royal Mail Special Delivery (insured) £30.00 UK mainland only.

Please contact me for overseas delivery quote.

This net can be purchased either via my Etsy Shop or you can buy directly from me if you do not want to set up an Etsy account, and I will invoice you via paypal.

Please contact me if you have any questions: knotty (dot) bear (at) gmail (dot) com

Please check out my Etsy Shop for more items.

Thank you for looking.

Take care,

Barry ;-)

More Gripfids

How Do All ;-)

I just finished covering a set of Gripfids for a customer in Switzerland.

The tools are 6mm, 8mm and 10mm diameter, suitable for up to 4mm, 6mm and 8mm cords respectively, 

 The tools have a solid Maple handle, covered with a beautiful Pineapple knot.

The smallest is a 35p x 30b, 5 Pass, Type 5 Pineapple knot, the next is a 36p x 32b, 4 Pass, Type 4 Pineapple knot, and the largest is a 45p x 40b, 5 Pass, Type 5 Pineapple knot.

A close up of the Pineapple knot handles.

I made some Pojama's (covers) for the Gripfids from odd ends of climbing rope with the core stripped out.

practical or not? who knows ;-)  

For more info about, and pictures of Gripfids see the link below:

Grip Fids

And to see some of the items I have made using Gripfids, check out my Ply-Split Braiding page

Please contact me if you have any questions: knotty (dot) bear (at) gmail (dot) com

Please check out my Etsy Shop for more items.

Thank you for looking.

Take care,

Barry ;-)

Some Ditty Bag Bodies, For Sale!

How Do All ;-)

I have just added some more items to my Etsy Shop

New Style Ditty Bag Bodies!

Here I have one Brand New! Ditty Bag body for sale.

The body of the bag is made from 12oz cotton Duck, and is 300mm x 175mm. the canvas is fully hand seamed and the base has a double seam for durability.

This bag has No eyelets installed yet, this is to give you the option of adding your own knot buttons as I have done on several of my bags, However if you would like a set of hand sewn Grommet eyelets installed, I can do this for you at an extra cost of £20.00

Please contact me first before ordering if you would like this option so I can change the listing price!

Clearance! 

Old Style Ditty bag Body!

This Clearance Ditty Bag body is one of my older models which I am putting out there for any budding knot tyer that might like to fashion their own ditty bag without the hassle of making the canvas body of the bag for themselves.

The only difference between this older version of my Ditty Bag bodies and the newer version is a slightly longer stitch length.

Please contact me if you have any questions: knotty (dot) bear (at) gmail (dot) com

Please check out my Etsy Shop for more items.

Thank you for looking.

Take care,

Barry ;-)